Jump to content

How Many Coals On Small Funnel


Recommended Posts

What kind of coals? QUicklights? Natural?

Pack it so the shisha is just barely touching the foil.. actually it doesnt even need to be touching the foil.

Holes along the outside edge and then I like to put a small hole of cirles in the middle..
Link to comment
Share on other sites

eh i use 2 1/3rds exotics on the medium phunnel.. so it should be okay for you to do the same but on the small.. if it get to hot just move the coals to the outside edge..

3ks.. break them in half and use like 3?
Link to comment
Share on other sites

take one exotica and break it up in 4 pieces. Still use 3 of them for the small phunnel (cause they don't get as harsh as other bowls... which is how it is made). keep that 4th piece to the side and add when the others die down so they'll all be even. If harsh, just take one off and blow through the bowl a little.

Packing depends on the shisha. Phunnels were made for tangiers and you pack that down, all the others you sprinkle in and get the shisha a little over the center hole. If it's even with it or under it, after the foil is put on and you breathe in, the foil will get pulled down and block out the air-flow through the center of the phunnel.

For tangiers, stab bigger, deeper holes and one big one in the middle so oxygen can flow. For other shisha, stab smaller holds but same thing with the hole in the center.

good luck
Link to comment
Share on other sites

QUOTE (Bulldog_916 @ Feb 25 2008, 09:10 PM) <{POST_SNAPBACK}>
QUOTE (waterboi @ Feb 25 2008, 06:56 PM) <{POST_SNAPBACK}>
If i am using exoticas i use 2 1/3rd pieces and if I am using 3Kings QLs i use three halves .


2 1/3 pieces of exotica on a small funnel has been too much for me. I'm knocking it down to 3 1/6 portions around the bowl or 2 pieces of jap coals.


Welll I start them kinda close to the middle then move them out to the edges as it gets going.

Sometimes I use a 1/3 and a 1/4. That works good for me also.
Link to comment
Share on other sites

QUOTE (Majid @ Feb 26 2008, 04:31 AM) <{POST_SNAPBACK}>
Do you guys use the 40mm 3 Kings? I see people here talk about breaking 3K in half, but i swear the 10 times or so i tried (with the 33mm) they'd just chip at the side, never a clean break in half.


I use 2 or 3 33m 3kings on my small funnel. I don't usually break them.

With tangier's tobacco though, the heat is more picky so if 2 is not enough, I'll break a 33m in half and add it. To break it, I score it with a knife in the middle and break it.

Occasionally, it will break into 4ths instead of halves and I'll just use 4ths.
Link to comment
Share on other sites

I go with a half of an exotica, two 1/4 pieces on my small. When they get to about half their original size, light up another and keep that rotation going. because tangiers doesn't need much heat I find the 1/4 pieces work great, along with big holes and lots of baccy
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...