Canon Posted March 13, 2008 Share Posted March 13, 2008 the ice bucket leaks, its not due to bad welding or anything, the welding is flawless. but when they put dents in it it cut the metal a little bit. the cuts are small enough to only a few drops of water get out every few hours, but its there nonetheless. if you have the problem im thinking put some wax on the inside and its good.btw, the only reason i noticed this is because i left my mashal unattended with water in the bucket for a few days. besides the white stuff (from the minerals in the water drying) down the stem, the only way i could tell it was leaking was by putting my finger on it and feeling a little bit of moisture.just thought id give everyone the heads up Link to comment Share on other sites More sharing options...
Alle Posted March 13, 2008 Share Posted March 13, 2008 Thanks for the sig quote Is it possible to get a picture of it? I work in a metal shop during the summers, and I might be able to think up a solution. Link to comment Share on other sites More sharing options...
EternalSoil Posted March 13, 2008 Share Posted March 13, 2008 solder it! Link to comment Share on other sites More sharing options...
erufiku Posted March 13, 2008 Share Posted March 13, 2008 Canon does the ice chamber actually do anything in terms of improving your smoke? I got the same pipe I believe but never use the ice chamber... Link to comment Share on other sites More sharing options...
supersubby Posted March 13, 2008 Share Posted March 13, 2008 QUOTE (Alle @ Mar 12 2008, 10:13 PM) <{POST_SNAPBACK}>Thanks for the sig quote Is it possible to get a picture of it? I work in a metal shop during the summers, and I might be able to think up a solution.lolll Link to comment Share on other sites More sharing options...
Patzke Posted March 13, 2008 Share Posted March 13, 2008 Superglue, or wax is also a good option, but i feel that if the metal heats up and cools down - you may have a problem with it "breaking" off. Link to comment Share on other sites More sharing options...
EricDub Posted March 13, 2008 Share Posted March 13, 2008 i was also thinking solder. the lead content would not be an issue because its just in the ice chamber Link to comment Share on other sites More sharing options...
oolatec Posted March 13, 2008 Share Posted March 13, 2008 Solder, definitely. Link to comment Share on other sites More sharing options...
Voski Posted March 13, 2008 Share Posted March 13, 2008 I shall inspect mine! Link to comment Share on other sites More sharing options...
HookahDude831 Posted March 13, 2008 Share Posted March 13, 2008 I busted out the mash'al at a party tonight, everyone loved it! no leaks for me!!! Link to comment Share on other sites More sharing options...
austinthecity Posted March 13, 2008 Share Posted March 13, 2008 are you sure that it's not condensation from when you had ice in it? Link to comment Share on other sites More sharing options...
Stuie Posted March 13, 2008 Share Posted March 13, 2008 JB Weld. Quick, and not near as messy pulling out the soldering iron and solder. Link to comment Share on other sites More sharing options...
Canon Posted March 13, 2008 Author Share Posted March 13, 2008 QUOTE (erufiku @ Mar 13 2008, 12:34 AM) <{POST_SNAPBACK}>Canon does the ice chamber actually do anything in terms of improving your smoke? I got the same pipe I believe but never use the ice chamber...it makes the smoke a little colder fi you put ice in it, but the best purpose of the bucket is to extinguish coals when your leaving. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now