Scalliwag Posted April 12, 2009 Author Share Posted April 12, 2009 QUOTE (giant ninja robot @ Apr 12 2009, 04:59 PM) <{POST_SNAPBACK}>Scalli, that large bowl on the right is absolutely beautiful. Something about woodcraft and woodworking just gets me happy, I think it has to do with my dad being a woodworker of sorts. Genetics and whatnot. Sorry I wasn't as elaborate with the praise as the concerns in the earlier post but I was in a huryy and when I see new ideas my brain goes into overdrive thinking of the pros and cons etc etc.At any rate, great work, I think once you roll out some of this stuff into the market and start making some dough your wife may change her tune And if it helps out, as commiseration often will, my wife bless her soul has had enough of my hookah mutterings as well A hearty pat on the back to ya sir You're an HF inspiration!Thanks bro. I appreciate the feedback and bringing up thing I may not have considered. The last thing I want is to dedicate a bunch of time and money into a failure. It's a lot easier to adjust things as I go than after I have a bunch ready to go and find a problem that someone may have forewarned me on. My wife is a neat freak so it would take a lot of money to offset her being upset when I am making messes with projects. Link to comment Share on other sites More sharing options...
theophylaktos Posted April 12, 2009 Share Posted April 12, 2009 QUOTE (Scalliwag @ Apr 12 2009, 11:34 AM) <{POST_SNAPBACK}>this is a pretty neat ass trick. It's not taking much shisha or coal and now there is no more messing with foil http://www.youtube.com/watch?v=nXm7LVTjFywthat was just an awesome idea, top notch work. Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 I finally got the camera tweaked (turned off the flash and used room lighting) The stuff looks and feels like plastic. Link to comment Share on other sites More sharing options...
mattarios2 Posted April 13, 2009 Share Posted April 13, 2009 Scalli, you really ARE a genious, id buy one for sure, maybe even a couple, one for nak mizo peach, one for nak mizo cherry and one for a couple of other flavors i am obsessed with. Like boho has said, those things won't shatter, they would be the perfect bowl for parties as long as you can fit a decent amount of shisha in them if you'd like. From your video i can see it smokes well with a little shisha, but is there room for a lot of shisha? Looks like from the pics their are a few diff sizes, damn good work Scalprops to you! Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (mattarios2 @ Apr 12 2009, 08:22 PM) <{POST_SNAPBACK}>Scalli, you really ARE a genious, id buy one for sure, maybe even a couple, one for nak mizo peach, one for nak mizo cherry and one for a couple of other flavors i am obsessed with. Like boho has said, those things won't shatter, they would be the perfect bowl for parties as long as you can fit a decent amount of shisha in them if you'd like. From your video i can see it smokes well with a little shisha, but is there room for a lot of shisha? Looks like from the pics their are a few diff sizes, damn good work Scalprops to you!Thanks Matty. They would be much more forgiving but depending on how it landed it could crack. Not likely but possible. One way to get more in them is not using the coal bucket and filling it up higher. For people that don't like phunnel bowls (crazy I know! ) I have another little add-on to make it a regular bowl. Flip ot one way and it's deep, and the other way and it's shallow. I'm thinking it may be the first convertible bowl? Link to comment Share on other sites More sharing options...
K1024 Posted April 13, 2009 Share Posted April 13, 2009 hey Scalli, you may have just made a solution for something ive been wanting for a while.ive talked to tarik at mnh about making a glass one, their glass maker cant do it. talked to eric, about a clay one, he gave me a list of what could possibly go wrong with clay one too.i want a phunnel for my leila...heres a pic o the dimensions...could you give the dimensions on yours and a thought on whether or not what you have would do the trick?thanks,K1024 Link to comment Share on other sites More sharing options...
JOE Posted April 13, 2009 Share Posted April 13, 2009 so its technically not a phunnel, ive seen an egyptian bowl like that, with the removable screen, looks awesome man! Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (K1024 @ Apr 12 2009, 09:14 PM) <{POST_SNAPBACK}>hey Scalli, you may have just made a solution for something ive been wanting for a while.ive talked to tarik at mnh about making a glass one, their glass maker cant do it. talked to eric, about a clay one, he gave me a list of what could possibly go wrong with clay one too.i want a phunnel for my leila...heres a pic o the dimensions...could you give the dimensions on yours and a thought on whether or not what you have would do the trick?thanks,K1024tobacco chamber is 3.8cm ID top to bottom and depth varies. Other than your tobacco chamber being smaller at the bottom the size looks close. Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (Jen and Joe @ Apr 12 2009, 09:30 PM) <{POST_SNAPBACK}>so its technically not a phunnel, ive seen an egyptian bowl like that, with the removable screen, looks awesome man!those are the pics with the phunnel tube and mod out. sorry I did not clarify that. Link to comment Share on other sites More sharing options...
K1024 Posted April 13, 2009 Share Posted April 13, 2009 sweet! technically it could be the same outer diameter at the bottom, just needs to be that id or a tiny bit bigger to fit and make a seal.where can i order one? Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (K1024 @ Apr 12 2009, 09:35 PM) <{POST_SNAPBACK}>sweet! technically it could be the same outer diameter at the bottom, just needs to be that id or a tiny bit bigger to fit and make a seal.where can i order one?I need to see a leila I guess. You lost me at the seal part. To me the pic looks like the top half of a bowl. Kinda like a shot glass actually. what is supposed to be sealing in that pic? Link to comment Share on other sites More sharing options...
K1024 Posted April 13, 2009 Share Posted April 13, 2009 (edited) thats the bowl, next to a medium phunnel.essentially how it seals is it sits on a big rubber washer, and then has a little stem that comes up into the bowl.edit: that pic is really old, the bowls are much cleaner now.... Edited April 13, 2009 by K1024 Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (K1024 @ Apr 12 2009, 09:44 PM) <{POST_SNAPBACK}>thats the bowl, next to a medium phunnel.essentially how it seals is it sits on a big rubber washer, and then has a little stem that comes up into the bowl.edit: that pic is really old, the bowls are much cleaner now....holy shit that is an odd duck! Let me sleep on that one I can make somrthing better than that I think Link to comment Share on other sites More sharing options...
Stuie Posted April 13, 2009 Share Posted April 13, 2009 Scalli those bowls are so unique and cool.....put me down for one....seriously! Link to comment Share on other sites More sharing options...
SimplexCoda Posted April 13, 2009 Share Posted April 13, 2009 scalli, as soon as your hoses and customs handles and bowls come out, your going to have like a months worth of my rent in your pocket man. Seriously you keep commin up with things i have to have. Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (Scalliwag @ Apr 12 2009, 11:04 PM) <{POST_SNAPBACK}>QUOTE (K1024 @ Apr 12 2009, 09:44 PM) <{POST_SNAPBACK}>thats the bowl, next to a medium phunnel.essentially how it seals is it sits on a big rubber washer, and then has a little stem that comes up into the bowl.edit: that pic is really old, the bowls are much cleaner now....holy shit that is an odd duck! Let me sleep on that one I can make somrthing better than that I thinkOkay, I see how this works now. I could make it. What is the size of the hole the stem comes up into? Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (Stuie @ Apr 12 2009, 11:53 PM) <{POST_SNAPBACK}>Scalli those bowls are so unique and cool.....put me down for one....seriously!Heck, you need to come back down and we'll smoke a bowl QUOTE (SimplexCoda @ Apr 13 2009, 02:21 AM) <{POST_SNAPBACK}>scalli, as soon as your hoses and customs handles and bowls come out, your going to have like a months worth of my rent in your pocket man. Seriously you keep commin up with things i have to have.Well bowls are ready and hoses are close. So stagger it out over a couple or few months. Don't wanna make ya homeless bro Link to comment Share on other sites More sharing options...
Stuie Posted April 13, 2009 Share Posted April 13, 2009 QUOTE (Scalliwag @ Apr 13 2009, 05:58 AM) <{POST_SNAPBACK}>QUOTE (Stuie @ Apr 12 2009, 11:53 PM) <{POST_SNAPBACK}>Scalli those bowls are so unique and cool.....put me down for one....seriously!Heck, you need to come back down and we'll smoke a bowl Love to but forgot this saturday we start birthing classes for the next 6 weeks so my weekends are shot. Link to comment Share on other sites More sharing options...
tinyj316 Posted April 13, 2009 Share Posted April 13, 2009 A wild spammer appears! Use Report! Its not very effective at the moment... but justice will be swift. Link to comment Share on other sites More sharing options...
K1024 Posted April 13, 2009 Share Posted April 13, 2009 QUOTE (Scalliwag @ Apr 13 2009, 02:53 AM) <{POST_SNAPBACK}>Okay, I see how this works now. I could make it. What is the size of the hole the stem comes up into?the inner diameter at the bottom of the bowl is 1.8cm (my diagram is off) the outer diameter there is 2.7cm Link to comment Share on other sites More sharing options...
Scalliwag Posted April 13, 2009 Author Share Posted April 13, 2009 QUOTE (K1024 @ Apr 13 2009, 01:43 PM) <{POST_SNAPBACK}>QUOTE (Scalliwag @ Apr 13 2009, 02:53 AM) <{POST_SNAPBACK}>Okay, I see how this works now. I could make it. What is the size of the hole the stem comes up into?the inner diameter at the bottom of the bowl is 1.8cm (my diagram is off) the outer diameter there is 2.7cmI'm talking about the hole the stem comes up into the bowl thru Link to comment Share on other sites More sharing options...
K1024 Posted April 14, 2009 Share Posted April 14, 2009 yeah...the inner diameter at the very bottom of the bowl (where the thing plugs into) is 1.8cm...i cant measure the pipe part, because its to far down there, though i dont think thats what your wanting. Link to comment Share on other sites More sharing options...
Scalliwag Posted April 15, 2009 Author Share Posted April 15, 2009 how far into the bowl does the stem go? Link to comment Share on other sites More sharing options...
K1024 Posted April 15, 2009 Share Posted April 15, 2009 QUOTE (Scalliwag @ Apr 14 2009, 04:37 PM) <{POST_SNAPBACK}>how far into the bowl does the stem go?1.5 cm Link to comment Share on other sites More sharing options...
Scalliwag Posted April 18, 2009 Author Share Posted April 18, 2009 5 bowls in a row ready to roll Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now