frost91 Posted November 10, 2009 Share Posted November 10, 2009 I broke the mini i recieved but realized that i could find another way to make a mini. I havent tried it yet, but depending on opinions and feedback will try it in the near future with my small. What do you guys think about putting quickdry concrete cement on the bottom of the phunnel, just enough for your liking, i know cement melts at very high temperatures and it call make the bowl alot more shallow. Its a permanent solution to the scalli mod! Link to comment Share on other sites More sharing options...
destructo Posted November 10, 2009 Share Posted November 10, 2009 i chose oatmeal because you can always remove the oatmeal if you dont want it Link to comment Share on other sites More sharing options...
frost91 Posted November 10, 2009 Author Share Posted November 10, 2009 i figure this is a good idea because i can get the area of a small. but not the depth, aka more smoke, and shorter sessions and easjer heat control Link to comment Share on other sites More sharing options...
Stuie Posted November 10, 2009 Share Posted November 10, 2009 I just want to see you do it. Link to comment Share on other sites More sharing options...
Hippo_Master Posted November 10, 2009 Share Posted November 10, 2009 Scalli mods are meant to redirect the smoke. Link to comment Share on other sites More sharing options...
frost91 Posted November 10, 2009 Author Share Posted November 10, 2009 QUOTE (Stuie @ Nov 10 2009, 04:48 PM) <{POST_SNAPBACK}>I just want to see you do it.i will definately try it unless someone here has some advice or reasoning why it wouldnt work! i need a new mini! Link to comment Share on other sites More sharing options...
NIGHTS OF BAGHDAD Posted November 10, 2009 Share Posted November 10, 2009 do it!!! Link to comment Share on other sites More sharing options...
j3oomerang Posted November 10, 2009 Share Posted November 10, 2009 why not jsut not pack the bowl to the top? ive been smoking my tang with about 3-4mm between the foil and tobacco with great results. Link to comment Share on other sites More sharing options...
frost91 Posted November 10, 2009 Author Share Posted November 10, 2009 for people saying epic fail please let me know why! if there are health concerns or taste concerns or anything else let me know! i wnat to make sure this will be 100% safe before i do it! thanks Link to comment Share on other sites More sharing options...
norcalsmoker Posted November 10, 2009 Share Posted November 10, 2009 Well I know concrete/cement dust contains crystalline silica which if inhaled can give you silicosis (lung disease). Since the cement will be a solid when heated I don't think it should be a problem. I wouldn't risk it though... Link to comment Share on other sites More sharing options...
frost91 Posted November 11, 2009 Author Share Posted November 11, 2009 ahahaha i need a mini tho! i might try to use a clay mixture or something without silica! Link to comment Share on other sites More sharing options...
Neil's butt boy. Posted November 11, 2009 Share Posted November 11, 2009 foil balls in the phunnel bowl first and shisha on top of them and it works pritty good Link to comment Share on other sites More sharing options...
Doubon Posted November 11, 2009 Share Posted November 11, 2009 (edited) I think if it was removable it would be the perfect solution. Maybe make a mold of your phunnel, then use that to make the concrete insert? Or maybe you could use Pam lol.Link to the topic that came up with oatmeal, i'd like to know how that happened... inside joke maybe? Edited November 11, 2009 by Doubon Link to comment Share on other sites More sharing options...
frost91 Posted November 11, 2009 Author Share Posted November 11, 2009 heres the thing with all those removable shisha savers, being removable, they all leak the juices down the bowl and act as a strainer (the more heat, the more viscus the molasses gets). With this idea, the juices will stay higher up and more flavor will be produced! Link to comment Share on other sites More sharing options...
twoapplesplease Posted November 11, 2009 Share Posted November 11, 2009 Anyone try just using like a foil pocket...I wish I still had a phunnel to explain and show you what I'm thinking....Take a large piece of foil wrap it a bit round your finger then stuff that down the phunnel tube so its a good inch down.Then poke your finger threw it and press the foil around the inside of the phunnel tube.Then you should be able to make the phunnel as shallow as you want.Then wrap the rest around the outside of the bowl...fill with tobacco and foil poke holes(carefull not to poke holes all the way threw the bottom layer of foil)Put coals on...I think I could still take pretty good pictures of what I mean even without a phunnel bowl.If needed Link to comment Share on other sites More sharing options...
Zinite Posted November 11, 2009 Share Posted November 11, 2009 I wouldn't. Look at the health safety page (called an MSDS) for whatever you're using. Most likely it'll release fumes at high temperatures. Link to comment Share on other sites More sharing options...
Stuie Posted November 11, 2009 Share Posted November 11, 2009 ... only a matter of time before the "Bring Back the Super Chief" Rally. Link to comment Share on other sites More sharing options...
twoapplesplease Posted November 11, 2009 Share Posted November 11, 2009 Sorry for jacking the thread abit ,but I seen this cool bowl on a german site...Its like a phunnel/vortex/shallow wide egyptian all in one...Looks interesting Link to comment Share on other sites More sharing options...
delSol_si Posted November 11, 2009 Share Posted November 11, 2009 QUOTE (Stuie @ Nov 10 2009, 10:45 PM) <{POST_SNAPBACK}>... only a matter of time before the "Bring Back the Super Chief" Rally.well, the mini phunnel rally didn't work, so i doubt the super chief will. I would only buy the super chief if it was made in small or mini probably...which i am almost sure eric will never do.QUOTE (twoapplesplease @ Nov 10 2009, 10:54 PM) <{POST_SNAPBACK}>Sorry for jacking the thread abit ,but I seen this cool bowl on a german site...Its like a phunnel/vortex/shallow wide egyptian all in one...Looks interestingThat actually looks more like a super chief than anything else in my opinion. Link to comment Share on other sites More sharing options...
twoapplesplease Posted November 11, 2009 Share Posted November 11, 2009 I have not seen a super chief before gonna have to find what one looks like now.Thanksthat bowl there is pretty small I think it sposed to hold like 10-15 grams tobacco and last 1-1.5 hours Link to comment Share on other sites More sharing options...
delSol_si Posted November 11, 2009 Share Posted November 11, 2009 QUOTE (twoapplesplease @ Nov 10 2009, 11:11 PM) <{POST_SNAPBACK}>I have not seen a super chief before gonna have to find what one looks like now.Thanksthat bowl there is pretty small I think it sposed to hold like 10-15 grams tobacco and last 1-1.5 hourshttp://www.hookahforum.com/?showtopic=11936there is one topic, im sure there are more out there Link to comment Share on other sites More sharing options...
twoapplesplease Posted November 11, 2009 Share Posted November 11, 2009 yea its pretty simialer,but I think you fill that german(its actually austrian made) one with tobacco fully covering the holes.Not like the ditch around the holes on the super chief.Anyway I'd still like to see someone try the foil pocket method I tried to describe. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now