Jump to content

Just Got A Mya Acrylic -needed Help With A Few Questions...


Recommended Posts

I just got a 23inch MYA Acrylic and all the other shisha I had sent to the US. (I live in the UK and have been waiting about 3 months for a cousin to pick these all up for me)!!! :rolleyes:

I've got a few questions, which I'd appreciate some help with:

1. When it comes to cleaning the acrylic what should I do for this?
2. The vase has a metal screw, wont water rust this?
3. The hose is washable, so does that mean I should let water run through it and leave it to dry, or just let a few drops in? -wont this rust the hose despite it being washable?
4. Should I regularly (i.e. after each use) rinse/soak the stem with water and lemon juice? Again, how should I avoid rusting the stem? Should I dismantle the stem into separate parts before cleaning?
5. I also have 3 hoses now -should I use a different one for different types of flavour (i.e. one for strawberry, blackberry, cherry etc., one for apples, and the other for all other shisha)?

Any other tips/advice appreciated.

I know some of these questions seem trivial/stupid, but I think I might have overcleaned my previous shisha (maybe rusting out the hose and damaging the stem; I want to keep the new one clean, but not end up destroying it!).


Can't wait to try the hookah out later today!

-------------------------------------------------------------------------------------------------------------------------
My new list of flavours (some 50gs ome 250g) now reads (I've only tried 4 or 5 of these so far):

AF
Strawberry
Grape
Apple
Double Apple

AA
Blackberry
Caramel Apple
Pomegranate
Guava
Strawberry Kiwi
Mocha Latte
Honeydew Melon
Cherry

Havana
Bahraini Apple
Tropical Peach
Banana and Honey
Pina Colada
Capuccino

Pharaoh's
Vanilla

Nakhla
5 Star
Licorice
Bubble gum
Coconut
Peach
-------------------------------------------------------------------------------------------------------------------------- Edited by rishi
Link to comment
Share on other sites

QUOTE
3. The hose is washable, so does that mean I should let water run through it and leave it to dry, or just let a few drops in? -wont this rust the hose despite it being washable?
If it's an MYA hose you can run all the water you want through it, it shouldn't rust. After you wash it take it outside, grab one and and spin it over your head. The centrifugal will force all of the remaining water out the other end so you won't have to worry about it rusting.

QUOTE
4. Should I regularly (i.e. after each use) rinse/soak the stem with water and lemon juice? Again, how should I avoid rusting the stem? Should I dismantle the stem into separate parts before cleaning?

Dismantling it and soaking it in a lemon juice and water mixture isn't a bad idea. Full blown soaking isn't necessary after each use, though. If you wanna soak it after each time it shouldn't do much harm, but after each use isn't a 'must do' type thing. To clean it after every use a nice scrub with a brush and lemon water then a rinse with plain 'ole water will be sufficient. I'm not really familiar with the 'anatomy' of MYAs but if taking it apart when you clean and dry it gives you a more thorough clean, why not?

QUOTE
5. I also have 3 hoses now -should I use a different one for different types of flavour (i.e. one for strawberry, blackberry, cherry etc., one for apples, and the other for all other shisha)?

If you want to, by all means. Seeing as you're hoses are washable flavor mixing shouldn't be much of a problem but some flavors tend to haunt hoses (like certain mint and coffee flavors) so if you want to keep separate hoses for different types of flavors feel free to. Edited by Shavo989
Link to comment
Share on other sites

QUOTE
Should I clean the hose after each use with water and then do the whirly thingy? Also, I shouldn't use lemon juice down the hose should I?

Hose cleaning, for me, is about a once-a-week thing; and lemon juice down the stem isn't too bad but like everything else make sure you rinse it out reall well. Then do the whirly thing.
Link to comment
Share on other sites

QUOTE (Shavo989 @ Dec 27 2006, 04:04 AM) <{POST_SNAPBACK}>
QUOTE
Should I clean the hose after each use with water and then do the whirly thingy? Also, I shouldn't use lemon juice down the hose should I?

Hose cleaning, for me, is about a once-a-week thing; and lemon juice down the stem isn't too bad but like everything else make sure you rinse it out reall well. Then do the whirly thing.

I see -so after my smoke with Al Amir Blackberry, I can just switch to Cherry without doing much else (other than changing the water in the vase and cleaning the tobacco bowl), and then to finish off my session, just rinse the vase, and use the brush followed by a rinse to clean the stem (and leave to dry)?

Sorry for the imbecilic questions, but good practice will ensure the longevity of my my toy!

thanks
Link to comment
Share on other sites

QUOTE
I see -so after my smoke with Al Amir Blackberry, I can just switch to Cherry without doing much else (other than changing the water in the vase and cleaning the tobacco bowl), and then to finish off my session, just rinse the vase, and use the brush followed by a rinse to clean the stem (and leave to dry)?


Sounds good to me.
Link to comment
Share on other sites

QUOTE (Shavo989 @ Dec 27 2006, 04:13 AM) <{POST_SNAPBACK}>
QUOTE
I see -so after my smoke with Al Amir Blackberry, I can just switch to Cherry without doing much else (other than changing the water in the vase and cleaning the tobacco bowl), and then to finish off my session, just rinse the vase, and use the brush followed by a rinse to clean the stem (and leave to dry)?


Sounds good to me.



That may have been my mistake in the past -after each session I washed the hose with water and then wondered why it had a funny taste (maybe also to do with the fact that my previous hose was not washable, resulting in the eventual metallic taste!!!).

I'll just rinse the hose after every 3 sessions (my approx. weekly average), and try to resist doing anything but putting it away without any sort of cleaning (?)after today's use! As long as this is ok, I'll leave you in peace now.

Thanks a lot.
Link to comment
Share on other sites

QUOTE (rishi @ Dec 26 2006, 03:27 AM) <{POST_SNAPBACK}>
I just got a 23inch MYA Acrylic and all the other shisha I had sent to the US. (I live in the UK and have been waiting about 3 months for a cousin to pick these all up for me)!!! :rolleyes:

I've got a few questions, which I'd appreciate some help with:


2. The vase has a metal screw, wont water rust this?


the metal screw should be stainless steel... stainless will not rust.

If the screw is Zinc, then yes that will rust. Replace with stainless.

QUOTE (rishi @ Dec 26 2006, 01:01 PM) <{POST_SNAPBACK}>
Quick Question:

Should I clean the hose after each use with water and then do the whirly thingy? Also, I shouldn't use lemon juice down the hose should I?


You don't have to do it everytime.... and no lemon juice... the hose is leather, leather + acid=bad... and you could get a concentrated lemon taste. Running water down the hose with sufficent pressure and whirling will do the job.

QUOTE (rishi @ Dec 26 2006, 03:27 AM) <{POST_SNAPBACK}>
[b]
4. Should I regularly (i.e. after each use) rinse/soak the stem with water and lemon juice? Again, how should I avoid rusting the stem? Should I dismantle the stem into separate parts before cleaning?


Also, like I said eariler... its a mya, so the stem should be stainless... at the worst (provided you emptied the base then sealed it over and over again to make the conditions for rust) you will get surface rust the can be scrubbed off with a brillo pad and/or some CLR.
Link to comment
Share on other sites

QUOTE (Zerodynamic @ Dec 27 2006, 09:37 AM) <{POST_SNAPBACK}>
QUOTE (rishi @ Dec 26 2006, 03:27 AM) <{POST_SNAPBACK}>
I just got a 23inch MYA Acrylic and all the other shisha I had sent to the US. (I live in the UK and have been waiting about 3 months for a cousin to pick these all up for me)!!! :rolleyes:

I've got a few questions, which I'd appreciate some help with:


2. The vase has a metal screw, wont water rust this?


the metal screw should be stainless steel... stainless will not rust.

If the screw is Zinc, then yes that will rust. Replace with stainless.

QUOTE (rishi @ Dec 26 2006, 01:01 PM) <{POST_SNAPBACK}>
Quick Question:

Should I clean the hose after each use with water and then do the whirly thingy? Also, I shouldn't use lemon juice down the hose should I?


You don't have to do it everytime.... and no lemon juice... the hose is leather, leather + acid=bad... and you could get a concentrated lemon taste. Running water down the hose with sufficent pressure and whirling will do the job.

QUOTE (rishi @ Dec 26 2006, 03:27 AM) <{POST_SNAPBACK}>
[b]
4. Should I regularly (i.e. after each use) rinse/soak the stem with water and lemon juice? Again, how should I avoid rusting the stem? Should I dismantle the stem into separate parts before cleaning?


Also, like I said eariler... its a mya, so the stem should be stainless... at the worst (provided you emptied the base then sealed it over and over again to make the conditions for rust) you will get surface rust the can be scrubbed off with a brillo pad and/or some CLR.



Thanks -hopefully this one will last longer than my previouse hookah.
Link to comment
Share on other sites

QUOTE (rishi @ Dec 27 2006, 02:46 PM) <{POST_SNAPBACK}>
Thanks -hopefully this one will last longer than my previouse hookah.


yea the acrylics are extremely durable. You shoulldnt have a problem with it. And mya backs up broken parts usually if you send them a pic
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...